• Home
  • Promotions
  • Equipment
    • Cosen Saws
    • EnvisionTec
    • Ganesh
  • Metalcutting
  • Services
  • News
  • Contact
  • Metalcutting
Abrasive Innovations
  • Home
  • Promotions
  • Equipment
    • Cosen Saws
    • EnvisionTec
    • Ganesh
  • Metalcutting
  • Services
  • News
  • Contact
  • Metalcutting

Manufacturing News

Prolonging Tool Life of Deep Hole Drills by Using the Appropriate Pilot/Starter Drill

12/14/2016

9 Comments

 
Guest Blog by Cory Cetkovic, Product Manager, Sphinx, Big Kaiser
Selecting the appropriate pilot drill is critical to maximize performance and tool life of a succeeding deep hole or micro drill. The purpose of a pilot drill is to create a clean, consistent working surface for the succeeding drill to enter the workpiece.

Important aspects such as diameter tolerance and point angle (Figure 1) are often overlooked leading to inconsistent, unacceptable results.

A pilot drill diameter should be slightly larger than nominal diameter, whereas the succeeding drill diameter should be smaller. This is often accomplished using positive and negative tolerances respectively (Figure 2). Selecting the incorrect pilot drill diameter can lead to premature failure of the succeeding drill as it will enter the pilot hole using its margins rather than its center-cutting point.
​
It is also important for a pilot drill’s point angle to be equal to or larger than that of a succeeding drill. The purpose of a larger point angle is to guide the succeeding drill to centerline while preventing its corners from colliding with the point angle left by the pilot drill. Using a pilot drill with a smaller point angle usually results in chipped corners on the more expensive deep hole drill after drilling 10-20% of the expected tool life.
Pilot Hole drilling
Figure 1. Three examples of a subsequent drill entering different pilot holes. The preferred situation with a pilot hole that has a larger diameter and point angle is identified with a green check mark.
Pilot Hold drill micordrill
Figure 2. Demonstrates one method of achieving the appropriate pilot hole diameter. The pilot drill and succeeding drill have equivalent nominal diameters, but tolerances prevent the pilot hole from being smaller than the deep hole drill diameter.
9 Comments

    Author

    Here you will find the latest breaking news from manufacturing as well as the newest product introductions and promotions

    Archives

    July 2017
    June 2017
    May 2017
    April 2017
    March 2017
    February 2017
    January 2017
    December 2016
    November 2016
    October 2016
    September 2016
    August 2016
    July 2016
    June 2016
    May 2016
    April 2016

    Categories

    All
    3D Printing
    3nine
    5 Axis
    Big Kaiser
    Chipbreaker
    Collet
    Coolant
    Deburring
    Destiny Tool
    Drilling
    Drilling : Pilot
    End Mill
    Ganesh Machinery
    Grinding Wheel
    Kyocera
    Manufacturing
    Microconic
    Milling
    Moog Aerospace
    MQL
    NEW PRODUCTS
    NTK
    Oemeta
    Oil Mist Seperators
    PCD
    Shop Safety
    Skills Gap
    Techniks
    TIR
    Toolex
    Turning
    Unist
    Workholding
    Xebec

    RSS Feed


Hours

M-F: 8am - 5pm

Telephone

319.329.8134

Email

rmellor@abrasiveinnovations.biz
Contact
1805 Red Fox Way
​Marion, IA 52302-9444
©2023  Abrasive Innovations. All Rights Reserved
  • Home
  • Promotions
  • Equipment
    • Cosen Saws
    • EnvisionTec
    • Ganesh
  • Metalcutting
  • Services
  • News
  • Contact
  • Metalcutting