• Home
  • Promotions
  • Equipment
    • Cosen Saws
    • EnvisionTec
    • Ganesh
  • Metalcutting
  • Services
  • News
  • Contact
  • Metalcutting
Abrasive Innovations
  • Home
  • Promotions
  • Equipment
    • Cosen Saws
    • EnvisionTec
    • Ganesh
  • Metalcutting
  • Services
  • News
  • Contact
  • Metalcutting

Manufacturing News

GRINDING WHEELS ARE A SAFE TOOL WHEN USED AS THEY ARE DESIGNED TO BE.

10/12/2016

0 Comments

 
However, when machines are used incorrectly or without caution, damage to the wheel can occur.
Be sure to follow the instructions below to ensure safe operation.
​
Picture

NORITAKE GRINDING WHEEL OPERATIONS AND HANDLING INSTRUCTIONS:
  1. The three main rules of handle Noritake grinding wheels are “do not roll ”, “do not drop” and “do not bump.”
  2. Grinding wheels should be stored in dry locations and on shelves.
  3. Before attaching on a machine you should perform a visual inspection and ring test. This will ensure that there are no cracks, splitting or chipped areas.
  4. Make sure that the maximum speed and size indication on the wheel correspond to the machine.
  5. Place Flange with the outer diameter and contact width are equal on both sides. Check to make sure you have the correct flange size before installing.
  6. Use the blotters that come with the grinding wheel to insure proper installation. Make sure the flange diameters are larger than the blotters.
  7. After installing flange balance the wheel with the proper weight distribution.
  8. Ensure a gap of 3 mm or less between the wheel and work rest piece. Make sure to leave a gap of 3 to 10 mm between the wheel and the adjustable torque.
  9. The wheel mounting point should be used with a wheel axle lengths of 13 mm.
  10. A proper wheel shield should cover at least half of the grinding wheel diameter.
  11. After installation of a grinding wheels a pre-operation run should occur for at least one minute before grinding starts, and at least three minutes after replacing a grinding wheel. Portable grinders should be test-operated in a safe location.
  12. Safety equipment including PPE and dust-proof masks should be worn during grinding operation at all times.
  13. To prevent imbalance of the grinding wheel shut down coolant flow before stopping the wheel. Allow the grinding wheel to continue rotating in order to dry.
  14. Friction sparks should be contain by a screen or operation guard.
  15. Proper ventilation is highly recommended to prevent respiratory illnesses.
0 Comments

    Author

    Here you will find the latest breaking news from manufacturing as well as the newest product introductions and promotions

    Archives

    July 2017
    June 2017
    May 2017
    April 2017
    March 2017
    February 2017
    January 2017
    December 2016
    November 2016
    October 2016
    September 2016
    August 2016
    July 2016
    June 2016
    May 2016
    April 2016

    Categories

    All
    3D Printing
    3nine
    5 Axis
    Big Kaiser
    Chipbreaker
    Collet
    Coolant
    Deburring
    Destiny Tool
    Drilling
    Drilling : Pilot
    End Mill
    Ganesh Machinery
    Grinding Wheel
    Kyocera
    Manufacturing
    Microconic
    Milling
    Moog Aerospace
    MQL
    NEW PRODUCTS
    NTK
    Oemeta
    Oil Mist Seperators
    PCD
    Shop Safety
    Skills Gap
    Techniks
    TIR
    Toolex
    Turning
    Unist
    Workholding
    Xebec

    RSS Feed


Hours

M-F: 8am - 5pm

Telephone

319.329.8134

Email

rmellor@abrasiveinnovations.biz
Contact
1805 Red Fox Way
​Marion, IA 52302-9444
©2023  Abrasive Innovations. All Rights Reserved
  • Home
  • Promotions
  • Equipment
    • Cosen Saws
    • EnvisionTec
    • Ganesh
  • Metalcutting
  • Services
  • News
  • Contact
  • Metalcutting